Our Products

Business Cards
CD Inserts
Composite Cards
Door Hangers
Graphic Design
Rack Cards
Vinyl Signs

All Business cards are printed on 12 point c2s cardstock 4/4 ( full color both sides)
uv  coated ( high gloss on both sides) are printed within 24 to 48 hours and shipped no later then 3 business days.
For those who need to write on their cards non uv coated when you choose non uv quantities of 5000 or more are printed within 4 to 5 business days after your order has been approved.
Other quantities options may effect turn around time.
Business cards artwork dimension must be set-up exactly  3.625" x 2.125" final trim size is   3.5" x 2" the text and other important graphics a minimum of 1/8" from the edge of yor desingn.
Do not put a thin frame around your design. because of the way the jobs are cut it is very difficult to cut thin frames very precisely and the finished product can come out looking  unevenly cut . If you do choose to add a frame  the thicker you make it the better.   It should be at list a 1/2 " thick.


1- Files must be EXACTLY the right size. Please note that your flyers prints at this size but once it goes through the cutting process it will be slightly smaller than the size you submitted.
Choose the flyer size from the price list or the template and design at EXACTLY this size.
For example a business cards should be set up EXACLTY as 3.625" x 2.125"; a 4x6 postcard/flyer should be set up EXACTLY as 4"x6" etc...

2- DO NOT set up your design on a larger canvas size.
For example some people start off with a sheet or canvas of 8.5 x 11 and then center their design in the middle. This is not correct.

3- DO NOT set the front and back of your flyer on the same sheet. They should be set up as two different files.

4- DO NOT name your flyer as just "front"or "back"
We receive hundreds of files and if they are all labeled generically it could cause confusion. Choose a file name that describes your flyer. For example, if your flyer is for a happy hour promotion, you could name your flyer like this: "happy_hour_front" and "happy_hour_back"

5- The resolution or quality of your image must be a minimum of 300 d.p.i. If the resolution is lower we will NOT process the order because the print quality will be affected.

6- Do not put crop marks (the lines where you are telling us where to cut) on your file. We have our own templates and we will cut as close as 1/16" as possible

7- Leave your text and other important graphics such as logos a absolute minimum of 1/8" from the edge of your flyer. It is highly recommended that you leave more than this for a nice clean look after your job is cut. The machine will cut off usually anywhere from 1/16" to 1/8" off of each side.

8- We do not print with a white border around your flyer UNLESS you design it this way. You should extend the background of your design
all the way to edge of your design so that no white shows. However, as stated in #7 above, leave the text and other important graphics a minimum of 1/8" for the edge of your design.

9- Do not put a thin frame around your design. Because of the way the jobs are cut it is very difficult to cut thin frames very precisely and the finished product can come out looking unevenly cut. If you do choose to add a frame, the thicker you make it, the better. It should be at least a1/2" thick.

10- Files should be converted to CMYK color mode. All files we receive in RGB will automatically be changed to CMYK
When you convert RGB files to CMYK sometimes you notice that colors change a shade and or get a little bit darker. In particular blues change the most. Blues have a tendency to turn purplish.

11- Illustrator files should be flattened to one layer.
All fonts should be converted to outlines. File needs to be saved as a version 10 or older. Files should be saved as an eps. We will not be responsible for fonts not converted to outlines or images that are not properly embedded. Please do not send .ai files.

12- Acceptable file formats are jpeg, tiff, pdf and eps.

The  aproximate  production time for incriments of 5000 is 1 to 2 business days.  Orders of 1000 have an extended leadtime of 3 to 5  business days for more information concerning turn around time contact us  305-720-2505

Business Card
1/8 Page Flyer
1/4 Page Flyer
1/3 Page Flyer
1/2 Page Flyer
Full Page Flyer

8.5x8 Bi-Fold
8.5x11 Tri-Fold
8.5x14 Quad Fold
11x17 Tri-Fold

4 x 9 Door Hanger
4.25 x 11 Door Hanger

Cd Insert